- Material: 3.5 mm steel, zinc-plated
- Length: 6"
- Width: 1"
- Assembly Break Strength: 3,000 lbs.
- Working Load Limit: 1,000 lbs.
Using the E Track Double Strap Connector
When you need a longer strap then you have, just take two shorter ones and attach them to this little connector - a handy double E track slot that can be carried anywhere and used everywhere. In essence two E track singles attached back-to-back, this convenient device can save you the bother of obtaining straps longer than you generally need to use. Attach two straps to standard E tracks or E track singles by pressing their E track fittings, then wrap around your cargo and clip them both to the E track double in the middle. So if your 12' strap isn't long enough to contain a 15' load, use this E track coupler to connect another strap and secure your cargo correctly.The E track double can also be used as a start and end point for the same single strap. To hold a lumpy package or several items together, snap the E fittings on both ends of the strap into the slots and contain your load effortlessly. There is zero installation necessary for use of the E track double, making it the easiest device around. Simply clip the straps' E track fittings into the slots.
View our selection of cam and ratchet straps with E track fittings.
Durable E Track Tie-Down Strap Coupler
This 6" long and 1" wide E track double has a break strength of 3,000 lbs. and a working load limit of 1,000 lbs. The zinc-plated 3.5 mm steel will tolerate rough elements and heavy use, as well as avoid corrosion and rust, and the portability and re-usability of this double will greatly extend its longevity.